Guide
Imposition guides
Plain answers to the questions that come up in prepress every day — written for the person who has to get the sheet right before it goes to plate.
How to choose paper weight (gsm): from flyers to business cards, which weight for which job
Which paper weight for which print job? Flyers, brochures, catalogue text and cover, business cards and boxes; choosing gsm for folding, binding and cost.
What is a colour control strip? Measuring density, dot gain and grey balance in print
Colour control strip explained: where it sits on the sheet, what its patches measure (solids, tints, grey balance, trapping) and leaving room for it.
How to calculate the print waste allowance: how many sheets to add above the delivered quantity
What the waste allowance in printing is, why it is added and how to work it out: make-ready, colour adjustment and cutting waste in sheets and cost.
How many printing plates does a job need? Colours, sides and signatures
How to count offset plates: colours per side, front and back, number of signatures, work-and-turn and extra colours, and what it does to the cost.
How to add bleed to a PDF: getting a trim-size file ready for print
What to do with a PDF that arrives without bleed: asking for a new export, extending the edge, why scaling up is a mistake, and what to check before print.
How to plan a guillotine cutting sequence: fewer cuts and accurate sizes from a printed sheet
The order to cut a printed sheet on the guillotine: reference edges, trimming the outside, strips, single and double cuts, and how to count the cuts.
How to calculate open cover size: saddle stitch, perfect binding and covers with flaps
How to find a cover's open size: back, spine, front, flaps and bleed, with worked examples for saddle-stitched, perfect-bound and flapped covers.
How to calculate spine width: the formula and a worked example for books and catalogues
How to calculate the spine width of a book or catalogue: page count, paper thickness, grammage and bulk, glue allowance and the open cover size.
Saddle stitch or perfect binding? Choosing by page count, paper and imposition
Saddle stitch vs perfect binding: page counts, the multiple-of-4 rule, creep, spine width, signature order and what changes in imposition.
What is the tail margin? The back edge of the sheet in offset printing and how it affects imposition
What the tail margin is, how it differs from the gripper margin, how many millimetres to leave, and how work-and-tumble and imposition change it.
What is a box closing sequence? Reverse tuck, straight tuck and crash lock cartons
Which carton flap closes first? Reverse and straight tuck ends, lock and crash lock bottoms, dust flaps and setting print direction for the closing.
How do you write a print quote? From the job's cost to the quote the customer sees
Writing a print quote: paper, plates, impressions and make-ready, waste, margin, VAT, and the terms to print under the price.
What is the maximum print area? Press sheet size, printable area and margins
What the maximum print area is, how it differs from the largest sheet a press takes, gripper and tail margins, and why catalogue figures need measuring.
Work-and-turn vs work-and-tumble: how the sheet turns on the press
Sheetwise, work-and-turn, work-and-tumble and perfecting compared: plate count, gripper edge, page layout, and which method suits which job.
How do you impose labels? Fitting the most labels on the sheet with the least waste
Label imposition on a sheet: how many fit, gutters and bleed between labels, gripper margin, trim marks, choosing the sheet size and counting waste.
Print job numbers and a job archive: finding a repeat job in a minute
Why print shops number jobs, what a job archive should keep, and how a reprint keeps the same imposition and margins. A practical routine.
How do you add page numbers in imposition? Upside-down pages and folios on a signature
Folios on book and magazine signatures: why half the pages sit upside down, where numbers go on odd and even pages, what to do with an unnumbered file.
What are the standard paper sheet sizes? 70×100, 64×90 and half and quarter sheets
The press sheet sizes used most: 70×100, 64×90 and 61×86 cm; half and quarter sheets, press size limits and how many A4 pieces each size yields.
What is the gripper margin? How much to leave and how it changes the layout
What the gripper and tail margins are, how many millimetres to leave, how they change how many pieces fit, and the gripper edge in work-and-tumble.
Offset or digital printing? Which is cheaper at which quantity
How offset and digital printing costs build up: plates, make-ready, click charges, paper and waste. A simple way to find the break-even quantity.
What are printer's marks? Trim, registration and colour bar marks
What the marks on a press sheet are for: trim marks, registration marks, colour bars, fold marks, and how to place them correctly.
What is paper grain direction? Long grain, short grain, folding and binding
What paper grain direction is, how to find it and why it matters: cracked folds, books that will not lie open, change on press, sheet choice.
What is a crease line? Folding lines on boxes and covers
A crease line is the pressed fold line in a dieline. How it differs from a cut line, why board cracks without one, and how thickness and grain change it.
What is PDF/X? PDF/X-1a, PDF/X-3 and PDF/X-4 explained
Why should a print-ready PDF be PDF/X? The differences between PDF/X-1a, X-3 and X-4, output intents, embedded fonts, transparency and common mistakes.
Choosing the sheet size for digital printing: SRA3, 13 × 19 or a long sheet?
Which sheet size is cheapest for digital printing? Click cost, the non-printable edge, how many up fit on a sheet and waste: how to pick the right sheet.
How much paper does a print job need? Sheets, weight and cost for labels and cartons
How many sheets and kilos of paper does a job need? Step by step with a label and a carton: pieces per sheet, waste, weight, cost and the right sheet size.
What is creep in printing? Pages pushing out in saddle-stitched work
In saddle-stitched magazines the inner pages push out and lose margin at the trim. Why creep happens, how to work it out and what designers should do.
What is a gang run? Printing several jobs on one sheet
A gang run puts several small jobs on one sheet and prints them with one plate set. Where the saving comes from, which jobs can share, how to split cells.
What is preflight? A PDF checklist before print
What preflight is and what to check in a print PDF: bleed, resolution, CMYK vs RGB, fonts, total ink, hairlines and overprint, item by item.
What is bleed in print? How many mm, and how to set it up
What bleed means, how many mm to add, bleed vs safe area, setting it in InDesign, Illustrator and PDF, bleed in imposition, and files without bleed.
What is paper weight (gsm)? Sheet weight and kilo calculation
What gsm means, how much one sheet weighs, how many kilos in a ream, how many sheets in a tonne — the formula, worked examples and gsm by job.
How to calculate print cost: the lines of a print quote
Costing an offset print job: paper by weight, plates, impressions, make-ready, waste, margin and VAT — step by step, with worked numbers.
Sheet cutting: how many pieces from one sheet?
From parent sheet to press sheet to the job: how to work out pieces per sheet, waste and paper per piece — with gripper margin and grain direction.
What is imposition in printing?
Imposition explained: how pages and pieces are laid out on the press sheet, gripper and bleed, sheetwise and work-and-turn, and choosing the sheet.
How to impose business cards
Step-and-repeat business cards on the press sheet: bleed and gutter, shared cuts, how many fit, double-sided cards and front-back registration.
Signature imposition: how book pages are laid out
How book and magazine pages are imposed on signatures: 8, 16 and 32-page signatures, saddle stitch and perfect binding, page order and creep.
Box dieline basics
What a carton dieline is: cut and crease lines, panels, glue tab and dust flaps, bleed on a box, nesting on the sheet and the mistakes to avoid.