Last updated:
Why the closing sequence matters
A carton lid usually has three parts: two small dust flaps and a larger tuck flap with a tongue. The dust flaps fold in first, the tuck flap closes last and its tongue slides inside. Get the order wrong and the lid will not close, or the dust flaps end up outside.
The order affects the print too. A logo or an “open here” line printed on the tuck flap has to face the right way once the flap is closed. Text that reads correctly on the flat blank can end up upside down on the finished box.
Reverse tuck and straight tuck
The two most common carton styles differ in where the lids sit. On a reverse tuck end carton (ECMA A20.20 in the international carton codes) the top lid is hinged to one panel and the bottom lid to the opposite panel. The blank nests tightly on the sheet with little waste, which is why it is common for pharmaceutical, cosmetic and small product boxes.
On a straight tuck end carton both lids are hinged to the same panel. The box opens the same way at both ends and looks neater on the shelf, but the blank takes a little more room on the sheet.
- Reverse tuck: lids on opposite panels, nests tightly on the sheet.
- Straight tuck: lids on the same panel, both ends open the same way.
- On both, the dust flaps close before the tuck flap.
Lock bottom and crash lock bottom
For heavier products the bottom does not rely on a tongue alone. On a lock bottom (also called a 1-2-3 bottom) the four bottom flaps interlock; it is set up by hand in a few moves.
On a crash lock (auto bottom) the bottom flaps are glued at the factory, so the bottom snaps into place as soon as the flat box is opened. It speeds up the filling line but adds a gluing step. On both, the closing sequence is read from the die's crease lines and the shape of the flaps.
Preparing the print for the closing
Carton artwork is made on the unfolded blank, so the designer sees the box flat. Designs made without the closing sequence in mind tend to show the same mistakes: lid text upside down, a barcode hidden under the glue flap, print on a dust flap that disappears once the lid is closed.
The easiest way to avoid them is to see the die folded before it goes to press. Cut and crease lines should be in separate spot colours; if a crease is mistaken for a cut, the knife cuts the box instead of folding it.
Laying cartons out on the sheet
The tuck style also decides how the carton is laid out on the sheet. Reverse tuck blanks can be rotated to nest into each other, which gets more boxes out of one sheet. Grain direction matters as well: creases that run with the grain fold more easily, while creases across the grain are more likely to crack, and the direction in which the box needs to be stiff also plays a part.